Wednesday, 10 October 2012

Configuration Of BSNL VMC(AN1020-21) Type-1 Modem

Configuration of VMC Modem Open any browser and on address bar type 192.168.1.1 and press enter here you will see a new window which demands User Name & Password Type User Name as admin & Password as password


 Now click on configuration then internet connection as marked in the following figure


Now delete any internet connection and after deletion press Add button as marked in the following figure


Now type PVC name as you desire enter your VPI and VCI provided by your ISP ( In case of BSNL vpi 0 and vci 35) and press NEXT button as marked

Now select ppp over ethernet as marked and press NEXT button


Now type service name as you desire then type your user name and password provided by your ISP and select Always ON then press NEXT button as marked




Now select marked items and press NEXT button


Now press APPLY button then click on REBOOT button provided just below ADMIN button as marked and press REBOOT after few seconds close the browser

After two minutes GREEN internet light will glow on your modem and surf the websites


10 comments:

  1. can you tell me up to how much speed does it support

    ReplyDelete
  2. can you tell me up to how much speed does it support

    ReplyDelete
  3. This is a ADSL2+ modem it can support up to 8Mbps speed.

    ReplyDelete
  4. 192.168.1.1 dis is my ip address i lost my password new password taken but i losted plz send my password

    ReplyDelete
  5. 192.168.1.1 dis is my ip address i lost my password new password taken but i losted plz send my password

    ReplyDelete
  6. You can try with password as admin.If it does not work tell me modem name with model.

    ReplyDelete
  7. You can try with password as admin.If it does not work tell me modem name with model.

    ReplyDelete
  8. You can try with password as admin.If it does not work tell me modem name with model.

    ReplyDelete
  9. erroe 1201 comes at first time starting what is the solution. thanumoorthy

    ReplyDelete